Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

+

DIN 11850 Series 2

•  Available Sizes : DN 10,DN 15,DN 20,DN 32,DN 40,DN 50,DN65,DN 80,DN 100
Polishing : ID-OD 0,8 Ra or better
•  Tolerances : DIN
•  Material : 1.4301 , 1.4307, 1.4404
•  Certifications :  

DIN 11866 Series 1

•  Available Sizes : DN 10,DN 15,DN 20,DN 32,DN 40,DN 50,DN65,DN 80,DN 100
Polishing : ID-OD 0,8 Ra or better
•  Tolerances : DIN
•  Material : 1.4301 , 1.4307, 1.4404
•  Certifications :  

DIN 11866 Series 2

•  Available Sizes : DN 10,DN 15,DN 20,DN 32,DN 40,DN 50,DN65,DN 80,DN 100
Polishing : ID-OD 0,8 Ra or better
•  Tolerances : DIN
•  Material : 1.4301 , 1.4307, 1.4404
•  Certifications :  

DIN 11866 Series 3 Pharma Tubes/Pipes

•  Available Sizes : 0,50" -0,75" -1,00" -1,50" -2,00" -2,50" -3,00" -4,00"-6,00" .
Polishing : SF1 , SF4
•  Tolerances : ASME BPE TABLE
•  Material : AINSI 316 L Low Sulfur
•  Certifications : ASME BPE , 3A
iso flag

 

 

 

ANOMALY OR INIDICATION
•  Cluster of pits . None accepted
•  Grit lines If Ra is met.
•  Nicks None accepted.
•  Oxides None accepted.
•  Pits If dia. < 0.020" and bottom is shiny.
•  Star burst . None accepted.
•  Scratches If lenght < 0.25", depth < 0.003" and Ra is met.
•  Surface craks None accepted.
•  Surface residuals None accepted.